Rust Inhibitors

  • BF 60
    View Datasheet
    A water dilutable corrosion control fluid that contains no Boron. BF 60 is very versatile and can be used as a machining fluid and a cleaner of production parts. It will provide up to 6 months of indoor protection on finished parts. It leaves a very thin soft imperceptible film that is easily removed by alkaline cleaners or solvents. Due to its lubricative ability it can function on tube mills and other light to medium machining and forming operations.
  • DARK COAT 1890
    View Datasheet
    A diluted asphaltic based solvent that provides long term rust prevention. This product leaves a dark thin coat of asphaltic material on parts, and dries to a hard finish as the solvent evaporates. Normally, drying time of 2 to 6 hours is adequate. Parts may be dipped or sprayed, and stacked wet on pallets or other suitable packing material if used in production. Cleanup and removal can be accomplished with mineral spirits or kerosene. DARK COAT 1890 gives up to two years outdoor shed storage, longer for indoors. DARK COAT is well suited for the replacement parts market where long term protection is required.
  • PARA-TEC 518X
    View Datasheet
    A solvent based, water displacing, rust preventative. This product leaves a thin waxy film that is easily removed by alkaline or solvent base cleaners. It is designed for long term indoor storage of ferrous and non-ferrous metals, up to 10 months; and short term covered outdoor storage. It should be considered for your more difficult protection needs.
  • PARA-TEC 5100
    View Datasheet
    A solvent based, water displacing, fingerprint neutralizing, rust preventative. This product leaves a thin imperceptible film that is easily removed by alkaline or solvent base cleaners. It is designed for long tem indoor storage of ferrous and non-ferrous metals; up to 18 months.
  • PARA-TEC 5100-H
    View Datasheet
    A solvent based water displacing, fingerprint neutralizing rust preventive. This product leaves a thin imperceptible film that is easily removed by alkaline or solvent based cleaners. PARA-TEC 5100-H is designed for long term indoor storage of ferrous and nonferrous metals, up to 24 months.
  • PRO-TEC 1220
    View Datasheet
    A water based, water dilutable corrosion inhibitor concentrate for ferrous and non-ferrous metals. A special inhibitor provides added protection for soft metals such as copper and brass. It forms a clear solution and leaves a thin, uniform rust inhibiting film which will provide up to 6 months indoor storage protection on in-process and finished parts and assemblies. Its inhibiting film is paintable with no adhesion problems. It can also be used as a protectant in open or closed circulating systems. Paint adhesion test recommended.
  • PRO-TEC PLUS
    View Datasheet
    A highly concentrated water base corrosion inhibitor for ferrous metals. It forms a clear solution in water and leaves a uniform rust inhibiting film on parts which will provide up to 6 months indoor storage protection on in-process and finished parts. PRO-TEC PLUS can be added to existing synthetic, semi-synthetic, and soluble oil systems to provide added rust protection. PRO-TEC PLUS inhibiting film is paintable in many applications with no adhesion problems. (Adhesion testing recommended.) It is compatible with Loctite PMS-10E Impregnation Resin.
  • PRO-TEC WB
    View Datasheet
    A water based, water dilutable corrosion inhibitor concentrate for ferrous metals. It forms a clear solution and leaves a thin, uniform rust inhibiting film which will provide up to 6 months indoor storage protection on in-process and finished parts and assemblies. Its inhibiting film is paintable with no adhesion problems and is compatible with Loctite PMS-10ETM impregnation resin. Used as medium for N.D.T. and hydrostatic pressure or leak testing. Paint adhesion test recommended.
  • SLUSHING OIL #9
    View Datasheet
    A highly effective non-staining rust protection for use on sheet steel and others during long periods of indoor storage of up to one year or longer; depending on overall storage conditions. It will prevent the formation of black stains when parts are stored in contact with each other.